2.5″ x 10″ Well Water Filter Set – Catalytic Carbon/KDF85 & Birm – for Iron, Sulfur, Rotten Egg Smell Reduction

Refillable Inline Filter 2.5″ x 10″. Fits most standard 10″ housings
Reduces iron and manganese from water sources

Applications: This system should be employed where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known or expected (hydrogen sulfide produces a distinct rotten egg/sulfur odor). This filter is most effective where iron and hydrogen sulfide levels are less than 5 ppm. The best contaminant removal rates are obtained where the pH is between 6.5 and 8.5 and where the water contains some dissolved oxygen. This filter will also remove ferric iron through mechanical filtration, although a sediment filter may be a more cost-effective option.

The life of the filter cartridge depends on the contamination level (iron, manganese and hydrogen sulfide levels) and the amount of water consumed on a daily basis.

What types of contaminants are you dealing with?
Problem                                                                                                                                                        Likely Cause
rusty red or brown staining of fixtures or laundry and/or your water has a metallic taste        excess iron
black staining of fixtures or laundry                                                                                                       excess manganese
rotten egg smell from water                                                                                                                     Hydrogen sulfide (H2S)